Country-specific grid protection configuration

This section provides configuration instructions for the grid protection relay in accordance with national grid codes. Settings must be applied precisely to ensure regulatory compliance for XOLTA C&I battery installations.

Each country subsection includes:

• Grid zones or synchronous areas (where applicable).
• System types, for example Type A or B, with associated power thresholds.
• Relay protection thresholds for over/undervoltage, frequency, and ROCOF Short for "Rate of Change of Frequency". In grid monitoring relays, it refers to how quickly the electrical frequency is changing over time. It's used to detect unstable grid conditions - especially during events like load shedding or generator disconnection - and can trigger protective actions if the frequency changes too rapidly..
• Automatic reconnection rules for both frequency and voltage conditions.
• Reference to local regulatory documents for further guidance.

Settings apply to external grid protection relays installed as part of the BAT-79, BAT-80, or BAT-80 AC battery systems and must be aligned with the respective country’s national connection code or energy authority requirements.